Container water gardening
You don’t need a large pond to get water gardening. Many pond plants will grow happily in a small watertight container. Amateur Gardening’s Kris Collins shows how to set up your own mini water garden in 5 easy steps
1 Site your container. Sit it on bricks or slabs if placing on a soft surface. This will help create a level and also prevent the barrel from rotting in contact with the soil. Check the rim with a spirit level
2 Smooth out pond liner inside your container and only three quarters fill with water to leave room for the plants and their pots. Note the volume of water you add to make step 4 easier
3 Get the pond liner as smooth against the container sides and bottom as possible and staple or tac it in place just below the rim. Use a sharp knife to cut away the excess material
4 Add a dechlorinator at the stated dose. This enables you to plant immediately. Alternatively leave the container, and a few full watering cans, to breathe for 48hrs before adding your plants to the display
5 Add your plants, deepest first. Place bricks in the bottom of the container to hold shallower plants at the right level. Add oxygenators and floating plants last.
Top up with treated water to the desired water line
Kris’ planting selection
Pontederia cordata
Sisyrinchium californicum
Equisetum hyemale
Houttuynia cordata ‘Chameleon’
Water hyacinth
Elodea crispa
Small hardy yellow water lily
Like the Amateur Gardening website? Subscribe to our magazine and you will be able to access our latest comprehensive content!








I planted up the water garden as in Kris’s tutorial, but it has a green scum on it after about 4 weeks; what am I doing wrong please?
Thanks,
Dianne
I made a barrel garden like this, but when it rained the overflow water went between the liner and the barrel.`not a good thing. A friend took the liner over the top of the barrel and fixed it with upholstery studs. very attractive. she still has her pond. mine rotted away andis now wood ash on the beds.